Reused Materials

  • Wood or Cabinet Door
  • Cabinet or Door knobs
  • Screws
  • Picture Hangers

Tools 

  • Drill and/or Screw Driver
  • Some type of marking tool (Pencil/pen)
  • Safety Glasses
  • Ruler/Tape Measure
  • 3/16 drill bit (depending on the size of your mounting screw)

img_2226

Step 1)

Mount hanging bracket.  I prefer a sawtooth hanger as it always seems more stable.  Measure to the center of the wood or whatever you decide to use and use appropriate hardware to screw in the hanger.  You could also choose to go with mounting some wire on the back of the rack.  Whatever feels right, man.

img_2160

Step 2)

Measure and mark where you want your knobs to be.  This way you can make sure that the knobs are in line and where they are supposed to end up.  If  you are not a perfectionist, skip this step.

img_2162

Step 3)

Pre-drill holes using the 3/16th drill bit going all the way through the material.

img_2166

Step 4)

Attach knobs to the board by screwing them on through the pre-drilled holes.

fullsizerender

Step 5)

Hang on the wall and load it up with your fabulous jewelry!  Enjoy!

 

Total Cost of Materials at Ballard Reuse $15

Total time to build 20 minutes